Register to get a quote for, order and track your PCB's online 24/7
Posts By : Calvin Switzer

Acceptability Criteria of Printed Circuit Boards, what standard do you use?

Posted On 19 February 2015 BY Filed Under PCB Fabrication

[1] As a printed circuit board manufacturer, PNC Inc [2]., Nutley, NJ, our criteria of acceptability during the inspection process is determined by IPC–A–600. The scope of this document describes the acceptable and non-conforming conditions of a bare boards either externally or internally during the final inspection process. The inspection criteria is then broken down into three classifications of acceptability, Class I, Class II and Class III. Each class’s acceptance criteria is then again broken down into three areas, target condition, acceptable, and nonconforming for the imperfections in question. At times there can be a disconnect or confusion between the end-user ...

Pc Boards

Quick turn Prototype PC boards from 24 hour turnaround to high volume printed circuit board production from our domestic plant in USA and/or China facilities. Our Modern 38,000 sq. ft. manufacturing plant with multi-million dollar investment with latest equipment and technology is capable of producing over 600 panels or 2000 sq. ft per day.

Contact Adress

  • Location:
    PNC Inc.
    115 East Centre St.
    Nutley, NJ 07110
  • Phone: (973) 284-1600
  • Email: sales@pnconline.com

Share with us

NewsLetter


© 2015 pnconline All right reserved